32-/64-point DC Output Module

Item		Specification
Type		EH-YT32	EH-YTP32	EH-YT32E	EH-YTP32E	EH-YT64	EH-YTP64
Output specification		Transistor output (sink type)	Transistor output (source type)	Transistor output (sink type)	Transistor output (source type)	Transistor output (sink type)	Transistor output (source type)
Rated load voltage		12 / 24 V DC (+10%, -15%)
Minimum switching current		1mA
Leak voltage		0.1 mA or less
Maximum load current	1 Point	0.2 A		0.1 A
	1common	4.0 A *1		1.0 A		3.2 A
Output response time	OFF→ON	0.3 ms or less
	OFF→OFF	1 ms or less
Number of output points		32 points / module				64 points / module
Number of common points		8 points / 1 common (number of common terminal is 4)
Surge removal circuit		Diode
Fuse *2		10 A / 1 common				5 A / 1 common
Insulation method		Photocoupler insulation
Output display		LED (green) *3
Short-circuit Protection		Built-in short-circuit protection function
Weight		Approximatery 0.16kg(0.35lb.)		Approximatery 0.15kg(0.33lb.)		Approximatery 0.13kg(0.29lb.)
External connection		Connector		Spring type terminal		Connector
Internal current consumption (5V DC)		Approximately 90mA				Approximately 120mA
External Power supply *4 (For supplying power to the S terminal)		12 / 24V DC (+10%, -15%) (Maximum 100mA)		12 / 24V DC (+10%, -15%) (Maximum 30mA)		12 / 24V DC (+10%, -15%) (Maximum 100mA)

*1

Total current for 4 common pins. The maximum current for 1 pin is 3A.

*2

The fuse is soldered in the PC board. When it is blown, it is not allowed for user to replace as safety reason.

*3

There are 16 points for each LED display. The displayed group is toggled using a switch.

*4

It is necessary to supply 12/24 V DC to the S terminal.

• Terminal Block for 32/6 points I/O module
• Cables for 32/64-point module

Internal Circuit Diagram