20/40/64 point type CPU Specifications
| Specifications |
Item |
20/40/64 point type |
| Control Specifications |
CPU |
32-bit RISC processor |
| Processing system |
Stored program cyclic system |
Processing
Speed |
Basic Instructions |
0.9 µs / instruction |
| Application Instructions |
Several 10 µs / instruction |
| User program memory |
16 ksteps max. (FLASH memory) |
| Operation Specifications |
Instruction language |
Basic Instructions |
39 types such as LD, LDI, AND, ANI, OR, ORI, ANB, ORB, OUT, MPS, MRD, MPP, etc. |
Arithmetic Instructions
Application Instructions |
132 types (arithmetic, application, control, FUN command, etc) |
| Ladder |
Basic Instructions |
39 types such as
 |
Arithmetic Instructions
Application Instructions |
132 types (arithmetic, application, control, FUN command, etc) |
| I/O processing Specifications |
External I/O |
I/O processing system |
Refresh processing |
| Max. number of points |
176 points |
| Internal output |
Bit |
1,984 points (R0 to R7BF) |
| Word |
32,768 words (WR0 to WR7FFF) |
| Special |
Bit |
64 points (R7C0 to R7FF) |
| Word |
512 words (WRF000 to WRF1FF) |
| Bit/Word shared |
16,384 points 1,024 words
(M0 to M3FFF, WM0 to WM3FF) |
| Timer / counter |
Number of points |
512 points (TD+CU) However, TD is up to 256 points *1 |
| Timer set value |
0 to 65,535, timer base 0.01 s, 0.1 s, 1 s
(64 points are maximum for 0.01 s *2) |
| Counter set value |
1 to 65,535 times |
| Edge detection |
512 points (DIF0 to DIF511:decimal)
+ 512 points (DFN0 to DFN511:decimal) |
| Peripheral equipment |
Program system |
Command language, ladder program |
| Peripheral unit |
Programming software
(LADDER EDITOR DOS version / Windows® version, Pro-H )
Command language programmer, portable graphic programmer cannot be used. |
| Maintenance functions |
Self-diagnosis |
PLC error (LED display): Microcomputer error, watchdog timer error, memory error, program error, system ROM/RAM error, scan time monitoring, battery voltage low detection, etc. |
- *1
- The same numbers cannot be shared by the timer and the counter. TD is 0 to 255.
- *2
- Only timers numbered 0 to 63 can use 0.01s for their time base.
|
